6
6.5 WebGUI Control
• Device Discovery
Please obtain the “Device Discovery” software from your authorized dealer
and save it in a directory where you can easily find it.
Connect the unit and your PC/Laptop to the same active network and
execute the “Device Discovery” software. Click on “Find Devices on Internet”
and a list of devices connected to the local network will show up indicating
their current IP address.
Note: Due to dual AVoIP nature of the unit, each unit will be listed twice, once
for each independent webpage/IP address.
By clicking on one of the listed devices you will be presented with the
network details of that particular device.
1) IP Mode:
If you choose, you can alter the static IP network settings
for the device, switch the unit into DHCP mode to automatically obtain
proper network settings from a local DHCP server, or set it to “Auto IP” to
automatically select an APIPA address. Select the preferred mode from
the IP mode drop-down, then click “Save” followed by “Reboot”.
Note: If the unit is set to DHCP mode but no DHCP server can be found,
the unit will automatically switch into Auto IP mode.
2) WebGUI Hotkey:
Once you are satisfied with the network settings, you
may use them to connect via Telnet or WebGUI. The network information
window provides a convenient link to launch the WebGUI directly.
