13
■ Enable Video over IP:
Unchecking this checkbox will disable the
AVoIP stream completely. This option should always remain checked
unless troubleshooting is being performed.
■ Video Loss Options:
Use the drop down to set the length of time to
wait for a lost source to return before showing the “Link Lost” screen.
Available options are: 3, 5, 10, 20, 30, 60 seconds, or Never Timeout.
If the “Turn off screen” checkbox is checked, the HDMI output will
be completely disabled, including sync, after the timeout time has
passed.
■ Scaler Output Mode:
Use the drop down list to select the preferred
output resolution for the scaler. Selecting one of the specific
resolutions will output all video at that resolution. Selecting “Pass-
Through” will output the source video at its original resolution.
Selecting “Native” will attempt to scale to the detected native
resolution of the display connected to the HDMI output.
■ EDID Lock for Device Button:
Enable or disable the functionality of
the front panel EDID buttons
.
