CYP CHDBT-1H1CL, Operation Manual

3

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

HDMI OUT

HDMI IN

RS232 IN

HDMI to CAT5e/6 with IR/RS232

Transmitter

1

2

3

1

HDMI OUT:

 Connect to a HDMI display for local monitoring of the 

HDMI signal or cascade to another Splitter.

2

HDMI IN:

 Connect with source equipment such as DVD/Blu-ray 

player or games console.

3

RS-232 IN:

 Connect to a PC/Laptop or RS-232 control device (with 

supplied 3.5mm Mini-jack to D-Sub 9-Pin adaptor) to transmit RS-

232 data to a suitably equipped receiver unit.

Note: This device has a last memory function and will retain the 

EDID settings of the last device connected via the CAT5e/6 output 

port when it is not connected to a display after power cycling.

The splitter will read the EDID settings of the device connected 

to the HDMI output of the receiver unit and if it detects a 4K

×

2K 

capable EDID it will transmit the signal in that format to the output 

port. If no 4K

×

2K capable EDID is detected then the unit will detect 

the EDID settings and send out the signal that all outputs can 

accept.