17
SYSTEM SETTING
2ND LEVEL
3RD LEVEL
VID
[System details]
PID
SN
FW Ver
Factory Reset?
NO
Yes
1) System Information Block:
Shows the units system ID numbers, serial
number and current firmware version.
2) Factory Reset:
Selecting YES will reset the unit’s settings back to
their factory defaults.
Note: The unit will automatically reboot after the factory reset is
complete.
6.6 RS-232 Commands
COMMAND
Description and Parameters
System Commands
help
Show the full command list.
help N1
Show help details about command
N1
.
N1
= {Command name}
get model name
Show the unit’s model name.
get fw ver
Show the unit’s c
urrent firmware version.