CYP CHDBX-1H1CE, Operation Manual

2

5. FEATURES

• 

 HDMI with 3D & 4Kx2K supported, HDCP and DVI compliant

•   Simultaneous HDMI and CAT5e/6/7 outputs
•   Supports data rate from 250Mbps up to 3Gbps
•   Supports wide range of PC resolutions from VGA to WUXGA 

and HDTV resolutions up to 4Kx2K (3840x2160@24/25/30Hz

, 

4096x2160@24Hz and 4K2K@60 YUV_420)

•   Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD 

Master Audio transmission (32-192kHz sample rate)

•   Supports distances up to 100 meters through CAT5e/6/7 cables
•   Supports Ethernet network rate up to 100Mbps
•   Can select EDID
•   Supports USB service port
•   Supports control of devices via 2-way IR
•   The 3D signal display follow by display TV’s EDID

Note: 

1. This system was tested with CAT6/23AWG cables, results may vary  

  with cables of a different specification.
2. Displaying HDMI 4Kx2K resolution require the standard 4Kx2K HDMI  

  cable and display in order for proper image displaying. 

3. 

This device obtain the last memory function therefore, the device  

  will use last output port's EDID when the output is not connected to  

  a display after power cycling.
  The unit will detect HDMI output's EDID when it obtain a 4Kx2K    

  EDID and send out the signal accordingly to other output ports. If  

  the HDMI output is without a 4Kx2K's EDID the unit will detect    

  all output's EDID and send out the signal that all outputs can    

 accept.