1
1. Introduction
The HDMI v1.3 Distribution Amplifier Series is the most advanced solution to
HDMI signal distribution. Each product in this series is compatible with HDMI v1.3
specifications, a cutting-edge technology which defines the supports to
transfer Deep Color (10-bit and 12-bit) video and new lossless compressed
(Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio, with a
high bandwidth up to 225MHz (6.75Gbps). Besides splitting and distributing, the
HDMI v1.3 DA series also does signal amplification and equalization, so as to
provide high performance I/O of audio and video.
2. Features
HDMI 1.3, HDCP1.1 and DVI1.0 compliant Receiver.
Deep color video up which 12bit, 1080p@(24/60)Hz.
One HDMI source to connect up to four HDMI displays simultaneously.
HDCP keysets allows each output to work independently when connecting
to a HDMI display.
Splits a HDMI source up to four outputs without signal loss.
Supports DVI source and DVI display by using HDMI to/from DVI adaptor
cable.
●
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master
Audio transmission (32-192kHz Fs sample rate).
Supports a wide range of PC and HDTV resolutions from VGA to UXGA and
480i to 1080p.
HDMI cable distance test with 1080p/8bits resolution, the Input/Output
source can run up to 15/15 meters. If 1080p/12bits the Input/Output source
can run up to 10/15 meters.
Supports EDID functionality. The unit will detect the first HDMI/DVI output
source’s EDID and record in the unit. If the first detected output source is
empty it will pass to next source, until the first HDMI/DVI been detected.
When users reconnect all the output sources or re-plug the power
source,the system will automatically recover the EDID.
Supports xvYCC.
Supports CEC bypass.
