3
6.2 Rear Panel
1 2 3
4
5
DC 5V
SERVICE
2
1
4
3
6
5
8
7
10
9
12
11
14
13
15
STD
TV
INPUT
OUTPUT
EDID
16
1
EDID STD/TV
Default factory setting is TV, leave as it is if the display is properly.
Switch to STD to use build-in EDID if the display has problems. When
the EDID control switch in TV selection, the unit will detect the first
HDMI output source’s EDID and record in the unit.
Note:
This function is not available in 1 by 2’s model
2
SERVICE
This slot is to connect with mini USB B type cable for firmware
update only.
3
HDMI INPUT
Connect input port to the HDMI or DVI output of your source
equipment such as DVD player or set-top-box.
4
HDMI OUTPUT
Connect the output ports to the HDMI display. When more than
one output connected, the HDMI outputs play identical video
signal simultaneously.
5
DC 5V
Plug the 5V DC power supply into the splitter and connect the
adaptor to AC wall outlet.