CYP CLUX-18S, Operation Manual

1

1. Introduction

The HDMI Distribution Amplifier Series is the most advanced solution to HDMI 
signal distribution. Each product in this series is compatible to HDMI 
specifications, a cutting edge technology which defines the support to transfer 
Deep Color (10-bit and12-bit ) video and new lossless compressed (Dolby 
TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio, with a high 
bandwidth up to 225MHz (6.75Gbps). Besides splitting and distributing, the HDMI  
DA series also does signal amplification and equalization, so as to provide high 
performance I/O of audio and video. Each of the buffered output can run up 
to 15 meters and can be cascaded.

2. Features

 

  HDMI HDCP1.1 and DVI1.0 compliant Receiver.

 

  Deep color video up to 12bit, 1080p@60Hz.

 

  One HDMI source to connect up to eight HDMI displays simultaneously.

 

  HDCP keysets allows each output to work independently when 

connecting to a HDMI display.

 

  Splits a HDMI source up to eight outputs without signal loss.

 

  Supports DVI source and DVI display by using HDMI to/from DVI adaptor 

cable.

 

  Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master 

Audio transmission (32-192kHz Fs sample rate).

 

  Supports a wide range of PC and HDTV resolutions from VGA to UXGA and 

480i to 1080p.

 

  HDMI cable distance test with 1080p resolution: Input or Output source can 

run up to 15M/5.1CH.

Note:

A. Cable tested with 24AWG using cables of another type may result in a  
  different operating distance.
B.  Cable distance test included the following: PS3 120G and 37" Samsung
  12-bit LCD TV.
C. Figures provided in this manual are reference figures only, actual    
  figures may depend on source and display use with cable specification.

 

  Can selected EDID source from TV or this splitter.

 

  Full HDCP Compliant.