3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
OUTPUT 2
OUTPUT 3
OUTPUT 4
CLUX-4EN 1X4 SPLITTER
1
1
OUTPUT 2/3/4:
Connect each of the HDMI outputs to HDMI displays
for simultaneous HDMI distribution.
6.2 Rear Panel
SERVICE
POWER
SYNC
EDID
DC 5V
OUTPUT 1
INPUT
STD
TV
1
2
3
4 5 6 7
1
SERVICE:
Manufacturer use only.
2
OUTPUT 1:
Connect the HDMI output to the HDMI display for
simultaneous HDMI distribution.
3
INPUT:
Connect the input port to the HDMI or DVI output (using a
DVI to HDMI adaptor) of your source equipment such as DVD/Blu-
ray player, game console, or set-top box.
4
EDID STD/TV:
The default setting is TV. When in this mode, the unit
will detect the EDID settings of the display connected to OUTPUT
1 and record them in the unit's memory. If there are any audio or
video issues then switch the unit to STD mode and power cycle
it. The Splitter will scan all connected displays and provide the
highest common settings.
5
SYNC LED:
The LED will illuminate when the HDMI source signal is
connected to the input port.
6
POWER LED:
The power LED will illuminate when the unit is powered.
7
DC 5V:
Connect the 5V DC power supply to the unit and plug the
adaptor into an AC wall outlet.
