①
HDMI Outputs 1: Connect each of the output ports to the HDMI display.
When more than one output connected, the HDMI outputs play identical
video signal simultaneously.
②
HDMI Input: Connect input port to the HDMI or DVI output of your source
equipment such as DVD player or set-top-box.
③
EDID Control switch: STD(INT) and TV (EXT), default setting is TV. When EDID
is on TV: Leave as it is if display is properly, unit will detect the first HDMI
output source's EDID and record in the unit. If the first detected output
source is DVI it will pass to next source until the fist HDMI is been detected.
The detection priority is HDMI v1.3 > v1.2 > DVI.
④
System Reset: Switch to “ON” stage, the system will send the internal CEC
to the display within 8~10 minutes to force all the displays switch to HDMI
1 port. Meanwhile, the source CEC will not functional to the system. When
switch to “OFF” stage, the system reset function will terminate.
⑤
Sync LED: The LED will illuminate when the HDMI source signal is
connected to the input port.
⑥
Power LED Indicator: The LED will illuminate when the power is connected.
⑦
Power: Plug the 5V DC power supply into the splitter and connect the
adaptor to AC wall outlet.
6. Operation Controls and Functions
6.1 Front Panel
1
2
3
4
5 6
7
HDMI
OUTPUT
HDMI
INPUT
1
STD
TV ON
OFF
EDID SYS. Reset
SYNC
POWER
DC 5V
CLUX-4M
HDMI V1.3 Splitter
3
