3
3.2 Rear Panel
2
HDMI OUT
3
HDMI OUT
4
HDMI OUT
5
HDMI OUT
6
HDMI OUT
EDID
STD
TV
1
2
1 EDID Control switch: Default factory setting is TV, leave as is if the display
is properly. Switch to STD to use build-in EDID if the display has problems.
When the EDID control switch in TV selection, the unit will detect the first
HDMI output source’s EDID and record in the unit. If the first detected
output source is DVI it will pass to next source, until the first HDMI been
detected
2 HDMI Outputs 4~8: Connect each of the output ports to the HDMI
display. When more than one output connected, the HDMI outputs play
identical video signal simultaneously.
