7
These audio ports are capable of independently outputting audio
routed from any audio source within the matrix. Treble, bass,
volume and audio delay adjustments can be set in the WebGUI
(LPCM 2.0 or analog stereo sources only).
8
ANALOG AUDIO IN 1~2:
Accepts unbalanced analog audio from
sources such as DVD players, PCs, MP3 players, etc. These audio
sources can be paired with the video from any HDMI input.
9
DIGITAL AUDIO IN 1~2:
Accepts digital audio (LPCM 2.0 only) from
sources such as Blu-ray players, game systems, PCs, etc. These
audio sources can be paired with the video from any HDMI input.
11
LAN:
Connect to an active Ethernet network to allow for Telnet
and WebGUI control of the matrix (refer to sections 6.9 and 6.10)
as well as to share the network (including Internet, if available)
with connected compatible LAN equipped HDBaseT receivers. This
allows for any Ethernet equipped device (e.g. a smart TV or game
console) connected to the LAN port of a receiver to share the
network/Internet access.
12
RS-232:
Connect directly to your PC/laptop to send RS-232
commands to control the unit (refer to section 6.7).
13
SERVICE:
Used for firmware service updates in the field via USB
thumb drive. After connecting a USB thumb drive containing
appropriate firmware, please navigate via the front panel menu to
5-Firmware → 2-Update → YES to begin the firmware update.
14
MAIN 24V & POH 24V:
Plug one of the 24V power supplies (included
in the package) into the port marked “MAIN 24V” to power the
matrix unit. If you wish to connect PoH powered HDBaseT receivers
to the matrix, please plug the second 24V power supply into the
“POH 24V” port. This will allow the matrix to provide 48v PoH to all
connected HDBaseT receivers.
Summary of Contents for CPLUS-662CVEA
Page 2: ......
Page 66: ......
Page 67: ......
Page 68: ...CYPRESS TECHNOLOGY CO LTD www cypress com tw MPM 662CVEA ...