15
COMMAND
DESCRIPTION
ZoneAvPair HDBT_Out A Slot 1 Load
Load the 1st A/V pairing for
HDBaseT Output A’s zone
• Optical Audio Return (OAR) Command Example
If you are also using the Zone Audio outputs (Stereo Zones) for any
zone we recommend using the Optical Audio Return (OAR) function
to set the Zone Audio output to always play the audio coming from
the TV itself. In this way the end user can freely switch between the
matrix input on the TV and the internal tuner/smart functions of the TV
and always be guaranteed audio (remember to set the TV’s optical
output to LPCM 2.0).
This command only needs to be resent after an audio only source has
been selected for that individual Zone Audio output. Commonly a
control system would have a “TV” button in the audio source selection
area along with your other audio sources.
COMMAND
DESCRIPTION
ZoneLineOut A AudioSrc=OAR_In A
Zone Audio output “A” plays
OAR audio from the TV
connected to HDBaseT output
“A”
• HDMI Mirroring Command Example
If you have rack (head end) based AVR’s for surround sound rooms
we recommend using the HDMI outputs and the HDMI mirroring mode
to easily have the audio and video sent to the AVR follow the signal
sent to that zone’s TV.
As long as no further commands are ever sent to the HDMI outputs of
the matrix you only need to set this up once:
COMMAND
DESCRIPTION
HDMI_Out H Mirroring=HDBT_Out A
Set HDMI output “H” to mirror
HDBaseT output “A”
When using the mirroring function you can use any standard
commands with the mirrored HDBaseT output and the mirroring HDMI
output will follow the commands. These can be an A/V Pairing, Video
or Audio commands, etc.
Summary of Contents for CPLUS-662CVEA
Page 2: ......
Page 66: ......
Page 67: ......
Page 68: ...CYPRESS TECHNOLOGY CO LTD www cypress com tw MPM 662CVEA ...
