2
3.2 Rear Panel:
POWER
DC 5V
VIDEO 1
Y
Pb/Cb
Pr/Cr
HDMI IN
/ BYPASS
HDMI OUT
AUDIO 1
AUDIO 1
Pr/Cr
Pb/Cb
Y
R
L
L
R
AUDIO 2
SVIDEO 1
SVIDEO 2
COMPONENT 1 IN
RS-232
COMPONENT 2 IN
AUDIO-IN-PC
VIDEO 2
AUDIO 2
3
2
1
1
3
4
5
7
6
2
3. Operation Controls and Functions
3.1 Front Panel:
POWER
HDMI 1
HDMI 2
HDMI 3
PC
COMP 1
COMP 2
SVIDEO-1
SVIDEO-2
VIDEO-1
VIDEO-2
AUDIO
DELAY
CSC-5300
HDMI 1.3 VIDEO SWITCHER
3D Video Comb Filter/12bit
480I
480P
576I
576P
1
2
4
3
q
Power: Plug the 5V DC power supply into this unit and connect the
adaptor to an AC outlet.
②
CV/SV inputs: Connect each of the input ports to the CV/SV and R/L
output ports of your source equipments such as DVD player or set-
top-box. The CV1/SV1/Audio1 and CV2/SV2/Audio2 are individual loops
for source equipments.
e
Component inputs: Connect each of the input ports to the component
and R/L output ports of your source equipments such as DVD/Blu-Ray
player or set-top-box. The mponent1/Component Audio1 and
Component2/Component Audio2 are individual loops for source
equipments.
r
HDMI inputs: Connect each of the input ports to the HDMI/DVI output
ports of your source equipment such as DVD/Blu-Ray player or set-top-
box.
t
PC input: Connect the PC/audio input port to the PC/audio output port
of your source equipment such as Laptop or PC.
y
RS232: 9-pin D-Sub connector for connecting to your PC or other control
console for remote control of the switcher.
u
HDMI output: Connect the output port to the HDMI display.
q
Power button and power LED indicator: Press the button to turn the unit
on and the power LED will switch on.
②
IR sensor.
e
Input source selection: Press the input button to switch to your desired
input source, the LED will turn on to indicate which input source is
selected.
r
Audio delay: Press to delay audio sources for 150ms, the LED will switch on
when power is on.
