9
6.9 RS-232 Commands for IR Matrix
Command A
Description
A1~A8
Switch Output A to 1~8
B1~B8
Switch Output B to 1~8
C1~C8
Switch Output C to 1~8
D1~D8
Switch Output D to 1~8
E1~E8
Switch Output E to 1~8
F1~F8
Switch Output F to 1~8
G1~G8
Switch Output G to 1~8
H1~H8
Switch Output H to 1~8
ABCD...1~ABCD...8
Switch Output A B C D... to 1~8 at the same
time
P0
Power OFF
P1
Power ON
I1~I8
Switch all the Output to 1~8
ST
Display the current matrix status and F/W version
RS
System reset to A1, B2, C3, D4, E5, F6, G7, H8
?
Display all available commands
Note:
1. Press "ALL" + "ENTER" +"1" buttons all together from the panel
to switch RS-232 to A and the LCM will display baud rate
19200bps.
2. Command "RS" will reset output A~H to 1~8 and shut down
the device automatically.