3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
IR
Power
All
Lock
Enter
1
2
5
6
7
8
3
4
8 HDMI Over CAT6 Transmitter w/IR Matrix
2
3
4
5
6
7
1
1
LCM:
Displays the information for each IR input and output setting.
2
IR:
IR Receiver window (accepts the remote control signal of this
device and all output displays or source devices).
3
Power:
Press this button to power the device on/off. The LED will
illuminate green when the power is on, red when it is in 'Standby'
mode.
4
All:
Press this button to select all IR output with one IR input signal.
The sequence should be pressed ALL → Number Key → ENTER.
5
Lock:
Press this button to lock all the buttons on the panel; press
again to unlock. The LED will illuminate in green when locked.
6
Enter:
Press this button to confirm when changing a setting.
7
Selection 1~8
When selecting the IR input for a specific IR output, press the
Number Key first to select the output and then press the Number
Key again to select the input.
