6
6.4.2 DC Power Manager Unit Installation
STEP 1
From the back of the rack chassis, slide the DC Power Manager into one of
two mounting locations and on top of one set of raised mounting brackets.
Make sure that the screw holes on the side of the DC Power Manager align
with the 2 screw holes on the side of the chassis.
STEP 2
From the side of the rack chassis, attach the DC Power Manager to the rack
chassis using two of the M3 screws supplied with the chassis.
Note: Be careful to not overtighten the screws as this could damage the
screw threads.
Summary of Contents for CSR-G6400
