CYP CUSB-V604H, Operation Manual

6

Note: Disabling HDCP support may enable the recording of the 

output of some source devices (typically PCs/Macs) that enable 

HDCP encryption even when it is not required by the current 

video content. Once HDCP support is disabled on this unit, the 

connected device should automatically switch to a non-HDCP 

mode as long as the playing content allows it. Certain other 

source devices (such as most major video game consoles) enable 

HDCP output by default, but will not automatically disable HDCP 

based on the connected device’s reported capabilities. In order 

to enable video recording of the output of these devices, HDCP 

must be manually disabled using the game console’s own system 

menu.

3)   ProcAmp Controls: 

This section provides direct control over a 

variety of video and audio settings when video capture is active.

Note: Changes to these settings have no impact on the HDMI 

bypass output signal.

■  Brightness: 

Provides control over the overall brightness of the 

captured video.

■  Contrast: 

Provides control over the overall contrast of the 

captured video.

■  Hue: 

Provides control over the hue shift of the captured video.

■  Saturation: 

Provides control over the color saturation level of 

the captured video.

■  Sharpness: 

Provides control over the amount of sharpness 

processing to apply to the captured video.

■  Volume: 

Provides control over the audio volume of the 

captured video.

■  Mute Audio: 

Mutes or unmutes audio in the captured video.

4)   Factory Reset: 

Press the “Factory Reset” button to reset the unit 

to its factory default state. After the reset is complete, the unit will 

reboot automatically.

5)   Detailed Signal Information: 

This section provides detailed 

information about the current source and capture resolution, 

HDCP state, DDC and hot-plug voltages, audio format and sample 

rate, and current firmware version.