Specifications
Input
Output
PC /YPbPr
Bandwidth
Differential
gain
Differential
phase
Power
consumption
Power
Dimensions
Unit gross
Video:
S-Video:
Analog Audio: (L/R)
1 Vp-p @75 ohm
2Vrms max 47 k ohm
650 MHz (-3db)
0.05%
0.05 degree
1 Watts (max.)
5V 1A AC adaptor
175(W)x 292(D) x 45(H)mm
1.5Kgs
Y: 1 Vp-p @ 75 ohm
C: 0.286 Vp-p @75 ohm
Video:
S-Video:
Analog Audio: (L/R)
1 Vp-p @75 ohm
2Vrms max 47 k ohm
Y: 1 Vp-p @ 75 ohm
C: 0.286 Vp-p @75 ohm
1. RS-232: 9-pin D-sub female connector for connecting to your other control
console for remote control.
2. CV/SV+Audio output: Use a CV/SV cable to connect to your display.
Use a 1 RCA to 1 RCA video cable to your display.
Use a 2 RCA to 2 RCA audio cable to your display.
(Option) connects to your PC AMP speaker system.
3. CV/SV + Audio input 4: Use a CV/SV cable to connect to your source 4.
4. CV/SV + Audio input 3: Use a CV/SV cable to connect to your source 3.
5. CV/SV + Audio input 2: Use a CV/SV cable to connect to your source 2.
6. CV/SV + Audio input 1: Use a CV/SV cable to connect to your source 1.
7. DC power jack : 5V1A power input ,.
Remote Control
1. Power: Switch between power ON and Standby.
2. Press button 1 to select source 1.
3. Press button 2 to select source 2.
4. Press button 3 to select source 3.
5. Press button 4 to select source 4.
Note: Replacement battery can be
found at a local electronic retail store.
1
2
3 4
5
Pull out the tab to
activate battery
