27
COMMAND
Descrip
tion and
Parameters
get video wall h bezel compensation
Show the video wall’s current horizontal bezel compensation value.
set video wall bezel mode N1
Enable or disable bezel compensation mode for the video wall.
Available values for
N1
:
OFF
[Disabled]
ON
[Enabled]
get video wall bezel mode
Show the current state of the video wall's bezel compensation mode.
set video wall unit index N1
Set the unit’s video wall index number.
N1
= 0~15
[Video wall index number]
get video wall unit index
Show the unit’s current video wall index number.
set user 1 edid data
Initiate uploading a new User EDID to the unit via the USB port.
Note: Commands will not be executed unless followed by a carriage return.
Commands are not case-sensitive.
Summary of Contents for DS-MSC14-4K22
Page 2: ......