4
7. Operation Controls and Functions
7.1 Front Panel
②
INPUT
①
①
IR sensor: This is a IR receiver window that receives IR signals from the remote
control included in the package.
②
INPUT: Press this button to select the desires input source, the LED will switch
on according to the selection.
7.2 Rear Panel
①
②
③
DC 5V
OUTPUT
COAX OUT
①
COAX OUT: This slot is where you connect an amplifier for transmitting an
audio signal with coaxial cables. When the audio return function is on
the audio signal will be received from the output and when the audio return
function is off the audio signal will be received from the input source.
This device only supports PCM 2CH.
Note:
1. The display TV or monitor must support an audio return function and
the function be must turned ON in order to perform the audio return.
2. The display TV or monitor's HDMI input jack must be connected to the
device with an audio return function.
②
OUTPUT: This slot is where you connect with an HDTV or HD display that does
support or does not support 3D signals for sending an input signal to the
display with an HDMI cable.
③
DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor
to an AC outlet. The LED will switch on when the power cable is plugged in.
