10
Note: For HDMI signals you can select in the OSD Menu whether you require
audio from the HDMI (AUTO) or from the analogue audio inputs (EXT)
4) ycbcr/yPbPr + l/r:
Connect to source equipment such as a DVD
player for both video and audio signal conversion.
5) cV + l/r:
Connect to a composite video source such as a video/
DVD player for both video and audio signal conversion.
6
coNtrol:
This port is the link for Telnet or Web GUI controls, connect
to an active Ethernet link with an RJ45 terminated cable
7
Power:
Switch this power toggle to turn on and activate the device
or turn off to shut it down.
8
Dc 5V:
Connect the power adaptor included in the package to the
device and plug it into an AC wall outlet for power supply.
6.3 remote control
1
Power:
Press this button to switch the device on or to set it to
standby mode.
2
HDMI1/2/3, Pc1/2/3, cV and coMP:
Direct source selection keys. Press one
of these keys to switch to the required
source.
3
MeNu:
Press this button to enter the
OSD menu.
4
eXIt:
Press this button to exit the menu
or the current selection in the OSD
menu.
5
ok &
▲▼◄►
:
Press OK to confirm the
selection or press the arrow buttons to
navigate the OSD menu. When the OSD
menu is not active, use the LEFT/RIGHT
(
◄►
) to control the volume level
.
6
Auto ADJuSt:
Press this button when
the image being outputted does not
correctly fit the display's screen. The
device will auto adjust the image to fill
the screen.
7
reSet:
Press this button to reset the device back to the default
settings.
CR-122
POWER
EXIT
MENU
OK
RESET
AUTO
ADJUST
PC1
PC2
PC3
CV
COMP
HDMI2
HDMI1
HDMI3
1
3
6
5
4
7
2