9
6.2 rear Panel
POWER
DC 5V
CONTROL
HDMI 2
HDMI 1
PC/HD
RS232
COAX
AUDIO
SERVICE
OUTPUT
3
C
P
2
C
P
1
C
P
3
I
M
D
H
2
I
M
D
H
1
I
M
D
H
Cr/Pr
Cb/Pb
R
L
Y
R
L
CV
AUDIO
INPUT
IR IN
5
8
4
1 2
3
6
7
1
Ir IN:
Connect the supplied IR extender to receive the IR signal from
the included IR remote. Ensure that the remote is within the direct
line-of-sight of the IR extender.
2
SerVIce:
Reserved for manufacturer use only.
3
rS-232:
Connect to a PC/Laptop or RS-232 control system to use RS-
232 commands to control the device (See Section 6.5 for details on
RS-232 commands).
4
outPut
1) HDMI 1/2:
Connect to an HDMI display or AV Receiver for video
and/or audio output.
2) Pc/HD:
Connect to a monitor/display for video output. For HD
(Component) output, use the supplied D-Sub 9pin to 3 RCA adaptor
cable for HD resolutions from 480p~1080p.
3) coAX:
Connect to an amplifier or active speakers for audio output
in digital format.
Note: When the input audio source signal is in bitstream format and
the AUDIO SOURCE setting is set to AUTO in the OSD menu, the coaxial
output will bypass the input audio signal including compatible surround
sound formats.
4) AuDIo
: Connect to an amplifier or active speakers for audio output
in stereo format.
5
INPut
1) HDMI 1/2/3:
Connect to HDMI sources such as Blu-ray/DVD player
for both video and audio signal conversion.
2) Pc 1/2/3:
Connect to a PC/Laptop source for video signal input
with a D-Sub 15pin cable.
3) 3.5mm Mini-jacks:
Connect to source's L/R output with 3.5mm
mini-jack for audio signal conversion.