12
6.3.4 Network Tab
This tab provides network configuration options including changing the
IP mode, viewing/setting the IP configuration, changing the admin login
password, and changing the Web Login timeout.
Note: This unit’s network defaults to DHCP mode.
1) IP Configuration: I
P Mode may be switched between Static IP or
DHCP. In Static IP Mode the IP, netmask and gateway addresses
must be manually set. When in DHCP Mode, the unit will attempt to
connect to a local DHCP server and obtain IP, netmask and gateway
addresses automatically. Please press “Save” after making any changes
to the IP configuration or mode.
Note: If the IP address is changed then the IP address required for WebGUI/
Telnet access will also change accordingly.
2) Web Login Account:
The WebGUI’s admin password can be changed
here. Please press “Save” after entering the old and new passwords to
enact the change.
Note: The default password is “admin”.
3) Web Login Timeout:
Select the length of time to wait before logging
the user out of the WebGUI due to inactivity. Available range is from 0
to 35970 minutes. Setting it to 0 will disable the timeout function.
