13
Note
1. Key:
"
" LED On
"
●
" LED Off
"
" LED Flashing
2. Not all of HDMI timings can be converted to SDI, therefore selecting the default EDID settings provides the
HDMI source with output timing reference.
3. EDID switch mode/Default EDID setting:
3G
1080p@60
HD
1080i@60
Update
720p@60
4. Due to the fact that the HDMI default timing is mainly set to 480p, there is a possibility that the image will
not be displayed correctly as that timing is not supported by SDI . To avoid this, set the HDMI source input
output setting to “Automatic” so that the source equipment will receive the native EDID settings of the
display.
5. The EDID update procedure only needs to be done for Nos. 4,8,12,16,20 & 24. (please refer to “EDID Update
button”in section 6.3).
6. When the HDMI input source signal has content that is HDCP encrypted the EDID Update and Video Lock
LEDs will both flash, the other LEDs will not illuminate and no image will be displayed.
Summary of Contents for PRO-H2-3GSDI
Page 1: ...PRO H2 3GSDI HDMI to 3G SDI Dual Output Converter OPERATION MANUAL ...
Page 2: ......
Page 18: ......
Page 19: ......
