CYP PRO-H2-3GSDI, Operation Manual

8

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front  Panel

EDID

Update

3G

HD

SD

3G SDI

Out 1

Out 2

HDMI/DVI

Video Lock

 HD EDID

 3G EDID

2

1

3 6

5 7

4

8

9

1

EDID Switch:

 Use this switch to select between the built-in or to 

update the EDID settings. Default EDID settings as shown below:

3G EDID



Native Mode 1080p@60

HD EDID



Native Mode 1080i@60

EDID update



Native Mode 720p@60

2

EDID Update button:

 Only use this function when the image has 

not displayed correctly after trying to switch the EDID Update/HD/3G 

mode with the EDID switch (refer to Section 6.3 for update procedure).

3

HDMI/DVI LED:

 The LED will illuminate green only when the input 

source is HDMI. It will not illuminate when the input is DVI.  

4

Video Lock LED:

 The LED will illuminate yellow when the HDMI input  

is receiving and locking a signal.

5

EDID Update LED:

 The LED will illuminate red when the EDID settings 

are being updated (refer to Section 6.4 LED Signal Chart).

6

SD LED:

 The LED will illuminate green when the HDMI input signal is 

480i/576i.

7

3G LED:

 The LED will illuminate red when the HDMI input signal is 

1080p@50/60.

8

HD LED:

 The LED will illuminate yellow when the input HDMI input 

signal is 1080p@24/25/30, 1080i@50/60 or 720p@50/60.