44
6
EDID STD/TV:
The default factory setting is on STD, leave as it is
when the display is properly. When in TV mode the unit will detect
the 1
st
CAT5e/6/7 output’s EDID when it obtain a 4Kx2K EDID and
send out the signal accordingly to other output ports. If the 1
st
CAT5e/6/7 output is without a 4Kx2K's EDID the unit will detect all
output's EDID and send out the signal that all outputs can accept.
This device obtain the last memory function therefore, the device
will use the last output port 1's EDID when output port 1 is not
connected to a display after power cycling or switching in
between the EDID setting.
Switch to STD to use build-in EDID if the display has problem.
STD EDID’s video at 1080p@60Hz and audio at LPCM 2CH.
7
SERVICE:
This slot is reserved for factory service only.
8
DC 24V:
Plug the 24V DC power supply into the unit and connect
the adaptor to an AC outlet.
Summary of Contents for PU-1H7HBTPL
Page 12: ......
