CYP PU-2H8HBTE-AD, Operation Manual

7

4. SYSTEM REQUIREMENTS

Source equipment with HDMI output connector
Display TV/Monitor with HDMI input connector
HDMI over CAT5e/6/7 Receivers with industry CAT5e/6/7 cables

5. FEATURES

  HDMI, HDCP and DVI complaint
  Common supported resolutions: HDTV: 480p, 576p, 720p, 1080i, 

1080p, 1080p24, 4K; PC: VGA, SVGA, XGA, WXGA, SXGA, UXGA, WUXGA, 

1920x1200@60Hz

  High Definition Audio supported: Dolby TrueHD, Dolby Digital Plus 

and DTS-HD Master Audio plus LPCM (up to 192kHz)

  Uncompressed data transfer over single CAT cable for HDBaseT 

outputs (100m - CAT6/7; 80m - CAT5e)

  Supports HDMI input up to 15m 1080p 8bit or 10m 1080p 12bit.
  Supports RS-232, 2-Way IR, Manual Selection Buttons, and Web GUI/

Telnet IP for control

  HDBaseT outputs support Power over Ethernet (PoE) with compatible 

receiver units

  Supports LAN serving to all connected HDBaseT zones
  Supports 3D signals and 4K Ultra High Definition

Note:

1.  This system was tested with CAT6/23AWG cables, results may vary with 

cables of a different specification.

2.  The PoE function is designed for powering compatible Receiver units only 

non-PoE Receivers will need their own power supply.  Receivers of another 

brand may not be compatible.

3.  Displaying HDMI 4Kx2K resolution require the standard 4Kx2K HDMI cable 

and display in order for proper image displaying.