19
6.3.4 Systems Settings Tab
This tab provides access to control a number of system configuration
controls including displaying the unit’s serial number, modifying the web
access privileges, changing the IP configuration, performing a factory
reset, rebooting the system, and updating the firmware.
1) Serial Number:
Displays the unit’s serial number.
2) Web User Setting:
This section provides a way to change the password
for the Administrator account. Click on “Save” to confirm and activate
any changes made to these settings.
Note: The default password is “admin”.
3) Network:
The IP Address, Netmask and Gateway can be set manually,
or DHCP can be enabled for automatic IP Configuration if your local
network supports it. Click on “Save” to confirm and activate any
changes made to these settings.
Note: If the IP address is changed then the IP address required for WebGUI
and Telnet access will also change accordingly.
4) System
■
Reboot:
Click this button to reboot the unit.
■
Factory Default:
Click this button to reset the unit to the factory
default settings.
Summary of Contents for PUV-1630TXWP-EU
Page 2: ......
