48
8. Collaboration Receiver Commands**
COMMAND
DESCRIPTION AND PARAMETERS
SET OUT N1 FORMAT N2
Set Rx Output N1’s video format.
N1 = B
[HDMI Out on the Rx]
Available values for N2:
1
[DVI Mode]
2
[HDMI Mode]
3
[Auto Detect]
GET OUT N1 FORMAT
Show Rx Output N1’s video format.
N1 = B
[HDMI Out on the Rx]
SET OUT N1 BRIGHTNESS N2
Set Rx Output N1’s brightness.
N1 = B
[HDMI Out on the Rx]
N2 = 0 ~ 100
[Brightness level]
Note: Only active when the output timing is
not set to “Bypass”.
GET OUT N1 BRIGHTNESS
Show Rx Output N1’s brightness.
N1 = B
[HDMI Out on the Rx]
SET OUT N1 CONTRAST N2
Set Rx Output N1’s contrast.
N1 = B
[HDMI Out on the Rx]
N2 = 0 ~ 100
[Contrast level]
Note: Only active when the output timing is
not set to “Bypass”.
GET OUT N1 CONTRAST
Show Rx Output N1’s contrast.
N1 = B
[HDMI Out on the Rx]
SET OUT N1 SATURATION N2
Set Rx Output N1’s saturation.
N1 = B
[HDMI Out on the Rx]
N2 = 0 ~ 100
[Saturation level]
Note: Only active when the output timing is
not set to “Bypass”.
