27
COMMAND
Description and Parameters
Analogue Audio Commands
set analog audio mute N1
Enable or disable muting the analogue audio output.
Available values for
N1
:
ON
[Mute the analogue audio output]
OFF
[Un-mute the analogue audio output]
get analog audio mute
Show the current mute state of the analogue audio output.
set analog audio volume N1
Set the volume level of the analogue audio output.
N1
= 0~80
[Volume adjustment in 0.5 dB steps]
get analog audio volume
Show the current volume level of the analogue audio output.
set analog audio left enhance N1
Set the left channel volume enhancement for the analogue audio output.
N1
= 0~40
[Volume adjustment in 0.5 dB steps]
get analog audio left enhance
Show the current left channel volume enhancement for the analogue audio
output.
set analog audio right enhance N1
Set the right channel volume enhancement for the analogue audio output.
N1
= 0~40
[Volume adjustment in 0.5 dB steps]
get analog audio right enhance
Show the current right channel volume enhancement for the analogue
audio output.
Summary of Contents for PUV-1H4HPL-AVLC
Page 1: ...PUV 1H4HPL AVLC 1x4 HDBaseT Splitter with AVLC OPERATION MANUAL ...
Page 2: ......
Page 44: ......
Page 45: ......