CYP PUV-3090RX-UEA, Operation Manual

5

Note: HDMI audio extraction is only available with LPCM 2.0 sources. 

Pressing this button will also change the setting on the receiver.

8

  BYPASS & EXTRACT LEDs:

 These LEDs will illuminate to indicate if the 

unit is in audio bypass or extract mode.

9

  POWER LED:

 This LED will illuminate to indicate the unit is on and 

receiving power.

10

  LINK LED:

 This LED will illuminate solidly when a live connection with 

a compatible receiver is active.

6.2 Rear Panel (Transmitter)

DC24V

USB

HDMI OUT

HDMI IN

CAT6A/7 OUT

1

2

4

5

3

1

  DC 24V Port:

 Plug the 24V DC power adapter into this port and 

connect it to an AC wall outlet for power.

2

  USB 2.0 Port (Micro-B):

 Connect directly to a standard USB host such 

as a PC or laptop to extend their USB functionality to all currently 

connected USB devices on both ends of the HDBaseT connection.

Note: If USB hosts are connected to both the transmitter and receiver at 

the same time, only the most recently connected host will be active.

3

  CAT6A/7 OUT Port:

 Connect to a compatible HDBaseT receiver with a 

single Cat.6A/7 cable for extension of all data signals. PoH will also be 

supplied to a connected compatible PD receiver.

Note: The PoH function is designed for powering compatible receiver units 

only. Non-PoH receivers will need their own power supply. Receivers from 

other brands may not be compatible. 

4

  HDMI IN Port:

 Connect to HDMI source equipment such as a media 

player, game console, or set-top box.

5

  HDMI OUT port:

 Connect to an HDMI TV, monitor, or amplifier for 

digital video and audio output.