CYP PUV-3090RX-UEA, Operation Manual

7

8

  BYPASS & EXTRACT LEDs:

 These LEDs will illuminate to indicate if the 

unit is in audio bypass or extract mode.

9

  POWER LED:

 This LED will illuminate to indicate the unit is on and 

receiving power.

10

  LINK LED:

 This LED will illuminate solidly when a live connection with 

a compatible receiver is active.

6.4 Rear Panel (Receiver)

USB

HDMI OUT

HDMI IN

CAT6A/7 IN

1

2

4

3

1

  USB 2.0 Port (Micro-B):

 Connect directly to a standard USB host such 

as a PC or laptop to extend their USB functionality to all currently 

connected USB devices on both ends of the HDBaseT connection.

Note: If USB hosts are connected to both the transmitter and receiver at 

the same time, only the most recently connected host will be active.

2

  CAT6A/7 IN Port:

 Connect to a compatible HDBaseT transmitter with 

a single Cat.6A/7 cable for extension of all data signals. Power via PoH 

will also be supplied to this unit when connected to a compatible PSE 

transmitter.

Note: A compatible PoH (PSE) transmitter is REQUIRED to power this 

receiver.

3

  HDMI IN Port:

 Connect to HDMI source equipment such as a media 

player, game console, or set-top box.

Note: If this HDMI input is connected, its video will automatically be 

output over the local HDMI output, overriding any current HDBaseT video 

source.

4

  HDMI OUT port:

 Connect to an HDMI TV, monitor, or amplifier for 

digital video and audio output.