CYP SY-XTREAM-PIP, Operation Manual

5

6.3 Configuration and Video Capture

6.3.1 USB Video Capture Control Software

The USB Video Capture Control software provides control over a selection 

of basic functions of the unit, including: primary HDMI source, audio 

source and control, picture mode (Full/PoP/PiP), PiP configuration, and 

video proc-amp settings. An option to return the unit to its factory 

defaults is also provided.

Note: Please obtain the “USB Video Capture Control” software from your 

authorised dealer and save it in a directory where you can easily find it. This 

software requires the .NET framework and only supports Windows 10 or later.

To use the software, connect the unit to your PC via the provided USB 3.0 

cable and then execute the control application. A configuration window, 

similar to the screenshot below, will appear. All changes made to the 

video capture signal via this app will take effect immediately.

1)  Audio Source:

 Switch the audio source type to record between 

embedded HDMI audio, analogue line input, or the audio mixer.

Note: Only 2 channel LPCM audio can be captured. Bitstream audio is not 

supported and will be automatically muted.

„

HDMI: 

Select this to capture audio from the currently selected 

HDMI audio source. Available options are: HDMI input 1, HDMI 

input 2, or “Follow Main Source” which will use the audio from 

whichever HDMI source is currently set as primary.