CYP SY-XTREAM-PIP, Operation Manual

7

5)  Picture Mode: 

This section provides a way to select the current video 

mode to use when capturing. Available modes are: Full, PoP, and PiP.

„

Full:

 The currently selected primary HDMI source will be displayed 

full screen.

„

PoP:

 Both HDMI sources will be displayed side by side with their 

proper aspect ratios maintained and black bars above and below 

the video.

„

PiP: 

Both HDMI sources will be displayed with the primary source 

full screen in the background and the other source displayed in a 

smaller PiP window that can be customised.

Configuration Examples:

2

1

2

1

6)  Main Video Source: 

Use these buttons to select which HDMI input is 

currently set as the primary video source.

7)  PiP Settings:

 This section provides control over the size, position and 

transparency of the PiP window when PiP mode is active.

„

Steps for size/position: 

Set the step size, in pixels, that is used 

when adjusting the size/position of the PiP window using the 

adjustment arrows. Setting a high number allows for faster 

adjustments, but small numbers are required when fine tuning.

„

Size:

 Click on the arrow buttons to adjust the horizontal and 

vertical size of the PiP window.

„

Position: 

Click on the arrow buttons to adjust the horizontal and 

vertical position of the PiP window.

„

Transparency:

 Use the slider to set the preferred transparency level 

for the PiP window.

8) Mirror: 

This section provides control over the horizontal and vertical 

mirror options for both windows in the multi-windowing modes.

„

Main:

 Click on the appropriate button to select the preferred flip or 

mirroring effect to apply, if any, to the primary source window.

„

Sub:

 Click on the appropriate button to select the preferred flip or 

mirroring effect to apply, if any, to the secondary source window.

9)  FW Version/App Version:

 Displays the unit’s current firmware version 

and the USB Video Capture Control software’s current version.