3
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
IN
POWER
ACTIVE
MODE
IN
SWITCH
MODE
SY-XTREAM-PIP
1
2
3
4
5
1
POWER LED:
This LED will illuminate red to indicate the unit is on and
receiving power but does not yet have a live HDMI source. When a live
HDMI source is detected, the LED will illuminate green.
2
ACTIVE LED:
When software on the connected PC is actively receiving
video from the unit via USB, this LED will illuminate green.
3
MODE LED:
This LED indicates the current PiP/PoP state of the unit’s
USB output. When PiP is enabled, the LED will illuminate red. When
PoP is enabled, the LED will illuminate green. When the output is full
screen the LED will remain off.
4
SWITCH IN Button:
Press this button to toggle the primary HDMI
source for the USB output between the two HDMI inputs.
Note: This does not affect the video source for the HDMI output which is
always a bypass output for input 1.
5
SWITCH MODE Button:
Press this button to sequentially switch
between the available USB video output formats (Full screen, PoP, PiP).
Note: This does not affect the format of the video displayed by the HDMI
output which is always a bypass output for input 1.
Summary of Contents for SY-XTREAM-PIP
