© 2018 Cyphre Security Solutions, LLC.
3 – 47
BT1 Security Appliance User Guide
3 BT1 Installation
3.10 Installing the BT1 Optional Tray Accessory in a Rack
Document P/N:
700-00007-Rev-A
Tools Required:
Pliers or cage-nut tool, #2 Phillips head screwdriver, static free
gloves for handling the rails, which could have sharp edges, ESD
equipment.
Materials Required:
The list of materials below are required to complete the
asset installation:
l
2 – Outer and middle slide rail assemblies (L brackets pre-attached.)
l
9 – 10/32 x ¾ inch #2 Phillips panhead or round screws (1 spare)
l
9 – 10/32 silver cage nuts (1 spare)
l
3 – 10/32 black clip nuts (1 spare)
l
4 – Threaded 10/32 mounting brackets (not required)
l
1 – Bag of assorted small screws (not required)
Figure 3 - 19: Sliding Rail Attachment Hardware, Pre-
installed
Figure 3 - 20: BT1 Optional Tray Accessory Sliding
Rails
Confidential
