5.16. Change the IDAC setting for each segment from 14 to 5, and click
Apply to board
.’
5.17. Cover the slider with the paper again, and touch the slider. The difference bars are now
higher. If the LEDs do not light, keep adjusting the IDAC settings lower until the LEDs light
reliably.
5.18. Experiment with other materials such as plastic and wood.
What’s Next
Now that you know how easy it is to tune a CapSense slider with PSoC Express, learn how to
create the project from scratch in Section 6.
6.11. Since there are four LEDs and five slider segments, have the LED G0 turn on when the
first and last slider segments are touched. To do this, simply click on the yellow
Sldr4
box.
6.12. To have the LED G0 turn on when the mechanical button is pressed, click the yellow G4
box.
Invert Symbol
Connecting Line
Default = LED Off
Invert Symbol
Connecting Line
Default = LED Off
Page 8
Page 13
