Cypress CLUX-12E, Operation Manual

1. Introduction

The HDMI v1.3 Distribution Amplifier Series is the most advanced solution to

HDMI signal distribution. Each product in this series is compatible with HDMI 

v1.3 specifications, a cutting-edge technology which defines the supports to

transfer Deep Color (10-bit and 12-bit) video and new lossless compressed

(Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio, with 

a high bandwidth up to 225MHz (6.75Gbps). Besides splitting and distributing, 

the HDMI v1.3 DA series also does signal amplification and equalization, so as 

to provide high performance I/O of audio and video.

2. Features

 

HDMI 1.3, HDCP1.1 and DVI1.0 compliant Receiver.

 

Deep color video up to 12bit, 1080p@(24/60)Hz.

 

One HDMI source which connect up to two HDMI displays simultaneously.

 

HDCP keysets allows each output to work independently when  

connecting to a HDMI display.

 

Splits a HDMI source up to two outputs without signal loss.

 

Supports DVI source and DVI display by using HDMI to/from DVI adaptor

cable.

 

Dolby Digital, DTS digital audio transmission (32-192 kHz Fs sample rate).

 

Supports a wide range of PC and HDTV resolutions, from VGA to UXGA  

and 480i to 1080p.

 

HDMI cable distance test with 1080p/8bits resolution the Input/Output

distance can run up to 15/15 meters. with 1080p/12bits the Input/Output

distance can run up to 10/15 meters.

 

Supports EDID functionality. The unit will detect the first HDMI/DVI output

source’s EDID and record in the unit. If the first detected output source is

empty it will pass to next source, until the first HDMI/DVI been detected.

When users reconnect all the output sources or re-plug the power

source,the system will automatically recover the EDID.

 

Supports xvYCC.

 

Supports CEC bypass.

1