1
1. Introduction
The HDMI Distribution Amplifier Series is the most advanced solution to HDMI
signal distribution. Each product in this series is compatible with HDMI
specifications, a cutting-edge technology which defines the supports to
transfer Deep Color (10-bit and 12-bit) video and new lossless compressed
(LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio)
digital audio, with a high bandwidth up to 225MHz (6.75Gbps). Besides
splitting and distributing, the HDMI DA series also does signal amplification
and equalization, so as to provide high performance I/O of audio and video.
2. Features
●
HDMI HDCP1.1 and DVI1.0 compliant Receiver.
●
Deep color video up to 12bit, 1080p@(24/60)Hz.
●
One HDMI source to connect up to two HDMI displays simultaneously.
●
HDCP keysets allows each output to work independently when connecting
to a HDMI display.
●
Splits a HDMI source up to two outputs without signal loss.
●
Supports DVI source and DVI display by using HDMI to/from DVI adaptor
cable.
●
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master
Audio transmission (32-192kHz Fs sample rate).
●
Supports a wide range of PC and HDTV resolutions from VGA to UXGA and
480i to 1080p.
●
HDMI cable distance test with 1080p/8bits resolution, the Input/Output
source can run up to 20/15 meters. If 1080p/12bits the Input/Output source
can run up to 15/10 meters.
●
Supports EDID functionality. The unit will detect the first HDMI v1.2/8bits, HDMI
v1.3 (10bits or 12bits) or DVI output source’s EDID and record in the unit.
When the output sources connected with the entire combination version
(HDMI v1.2/8bits, v1.3/10bits, v1.3/12bits or DVI), the system can
automatically to supports HDMI v1.2/8bits, v1.3/10bits, v1.3/12bits or DVI to
expect ports.
[Note]: The detection priority is HDMI v1.3 > HDMI v1.2 > DVI.
●
Supports CEC bypass.
