S700 can provide warning for the vehicle fault, in the LCD shows the ERROR icon when
a failure is detected, the position ERROR code displayed ERROR code n, n = 0 ~ 11
shows ERROR, ERROR code comparison table 1 table as shown below
System Parameter Settings
CYRUSHER.COM
Page 15
Error code definition
In use, the time interval between starting and shutdown should not be less than 3
seconds, and do not press the MODE key when it is turned off
Pay attention to safe driving in use and avoid instrument crashing. Try not to use it
in harsh conditions, such as heavy rain, heavy snow, and exposure. Try to avoid the use
of battery under voltage and avoid damage to electric car batteries.
When the temperature is under 10
℃
, the screen will turn dark with the reduce of the
temperature.
Maters needing attention
question:why it can not be started?
Answer: checking whether the wire harness of the instrument is in good contact
with the controller.
question: How should the fault code be handled?
Answer: coming to the ebike agent for maintenance
Frequently questions and answers
Status code
（
decimalism
）
0
6
7
8
9
10
11
Normal
Battery under voltage
Motor fault
Handle fault
Controller fault
Reception fault
Communication fault
Battery charge
Check whether the power line is loose
Check the links, if it is normal, then
replace the handle
Check the links
Check the links of the instrument cable
State
Process mode
Check the links of the instrument cable
