Handlebar
Control
UP
MORE
DOWN
Instructions for operating methods and functions
1) Starting up shutdown
LCD-S700 adopts the LCD part and external
three - to - button separation in the form of
design, the communication is connected by the
bottom lead.
There are three keys, using the key
replaces “UP”,
replaces“MORE”,
replaces “DOWN”.
Long-press the MODE button for 3 seconds
when the instrument is off, the instrument
fully shows and starts working, turn on the
controller power; In boot state , long press
the button for 3 seconds, the
cyclocomputer be power off and close the
controller power supply. If there is no riding
or not any operations to the instrument in
10 minutes( set time by the user), the
instrument will power off automatically. In
the shutdown state, the power consumption
of the instrument and the controller is 0.
The instrument boot display interface is as
the image 1 shown
2) Speed Mode Switch
Long press the button and to
change the display information of
speed,show the real-time speed → the
max speed → the average speed cyclically.
Display interface of speed mode
、
riding
time are as the image 2,3,4 shown
External key definition
CYRUSHER.COM
Page 4
Image 1
km
km / h
SPEED
PAS
POWER
ODO
Image 1
km
km / h
SPEED
PAS
POWER
ODO
Real-time
Speed
