The F key selects a Function by pressing any of the other keys.
The Functions are defined in the next table. The F key also ends
the menu, Intercom or other keypad operation
Function and Instructions
Icon
Pressing the F key while in a menu or Intercom Mode will end
the keypad operation. Comfort will say “Thank You, Goodbye”.
Function Keys
Press the F key followed by 0 to 9, * or #. For some keys you may be
asked for your sign in code and # key to access the selected function.
INTERCOM with other keypads. All keypads can hear.
Press any key on any other keypad to talk to originator
and cut off other keypads. Only 1 side can talk at a time
by pressing and releasing any key.
User 3,0
Change Sign In Codes
Sign in with your present code. Enter new code and #
key. Repeat to confirm
Program
4
Program/Change Phone Numbers
Select Phone 1 to 8. For each Phone, assign Phone
Type as follows:
0 = No Phone, 1 = Voice Phone (mobile or landline), 2
= Pager, then "Enter new number and # Key"
User 3,3
Event Log
1 - Next Event, 2 - Previous Event, 3 - Next Day, 4 -
Previous Day, 9 - Last Event.
User 2,4
Record Memo
Record a Memo message into any mailbox. New
Message LED will light up. Pressing # tells who the
memo is for. Hear message by pressing *+code+#
User 3,4
Test Menu
1 - Battery Test (turn off AC to test battery)
2 - Security Check (announce activated zones)
3 - Dial Test (audible dial to programmed phones)
4- Siren Test (test the siren for a few seconds)
5 - Strobe Test (turn on and off strobe)
User 4
Home Control Menu.
The list of ldevices to be controlled will be announced, if
any.
User 3,1
Bypass Zones.
"Enter Zone number & # key. Press 1 to Bypass, 0 to
unbypass
Menu
Function and Instructions
Icon
Comfort II User Manual
7
