Comfort Voice Menus
By Keypad
Press * and your code and # key to access the User Voice Menu. If you
put * before your code, it does not disarm the security system.
When the system is armed (security is on) or there is an alarm,
entering your code without the * key in front turns off the
security or alarm.
The default Master Code is 1234.
Change
your code as soon as possible
to prevent unauthorized access into your security system.
By Local Telephone
Any telephone on the premises can be used to control Comfort.
1
Lift the handset, or turn on hands free mode for a speakerphone.
2
Press the * key within 4 seconds.
If you do not press the * key within 4 seconds or if some other
key is pressed first, you will not be able to sign in. If that
happens, replace the handset and try again.
3
Enter your sign-in code and the # key.
The default User Sign-in code is *1234#. Up to 8 personal
mailboxes can be set up, each with its own unique sign-in code.
If the wrong sign-in code is entered, Comfort will say "wrong code". Take
your time to enter the correct code. Once the correct sign-in code is
entered, you will be greeted by the User Voice Menu;
Welcome, Security Off
(You have N new messages)
(New messages are played)
Press 1 to Arm Security System
2 for Messages
3 for Security System Menu
4 for Home Control
5 for Voice Station
6 for Door Station (if installed)
7 for Volume
y
Pressing 1 allows you to arm the security system to Away, Night, Day
or Vacation Mode.
y
Pressing 2 allows you to access and manage the messages in your
personal mailbox.
y
Pressing 3 lets you change Sign-in code, bypass zones, listen to the
Event Log and perform other security functions.
y
Pressing 4 allows you to activate the electrical appliances and lights
which are controlled by Comfort.
y
Pressing 5 puts the phone into Intercom mode with the keypads.
Comfort II User Manual
10
