y
Pressing 6 allows you to talk with someone on the Door Station (if
installed)
Each menu may lead to other submenus. These are described in the User
Voice Menu Reference. There is always a voice menu to guide you so you
do not have to remember any code sequences. For full details of all the
User menus, refer to the User Voice Menu Flowchart and reference in this
manual.
By Remote Telephone
You can access Comfort from any telephone in the world.
1
Dial to your telephone number.
2
If no one answers the phone after the programmed number of rings,
Comfort answers, and plays the greeting message (if it has been
recorded). Callers can leave messages on the Answering machine.
3
While the greeting message is playing, press *, then your User and #
key. If a Greeting Message has not been recorded, Comfort answers
“Please sign in” and waits for a code.
4
If a valid code is entered, the User Menu will be played.
5
To end a call, it is recommended that you press # to go back to the
previous menu until Comfort says "Thank You, Good bye". You may also
hang up the phone, but the system will take slightly longer to detect that
the incoming call has ended.
While Comfort is saying "Thank You, goodbye, you can press *
and enter your code to gain access" saving you the trouble of
calling again.
6
You may arm, disarm, retrieve messages, record message, check alarm
history just as you would on your local phone.
Program Menu
The Program Menu allows user-defined settings for Comfort to be
changed. It is accessible only by User 1 code (the Master code). In order
to get to Program Menu,
y
On the Keypad, press *, enter your Master Code (1234 by default)
followed by the # key. The User Menu will be heard. Press 9 for
Program Menu. The voice menu says..
Program Mode
Press 1 For Answering Machine Settings
2 for Date and Time
3 for Security Settings
4 to Change Phone Numbers
5 for User Code
6 for Time Program
y
Pressing 1 allows you to change the Answering Machine settings; the
number of rings for answering, the recording time for each message,
and to record the Greeting Message.
y
Pressing 2 lets you change the Date and Time, and Holidays.
Comfort II User Manual
11
