User Code (5)
0 to Delete mailboxes
1 to Add User
2 to Erase User
Delete Mailboxes (5,0)
Delete Mailboxes, Press 1 to confirm
This erases all the user codes, names, reminders, greeting message and
messages. After you press 1 to confirm, you will hear
"Mailboxes Erased"
after a few seconds. The User code will be reset to 1234.
Add User (5,1)
Comfort supports up to 16 users, each with their own user code. The
first 8 codes have mailboxes for messages, Users 9 to 16 do not have
mailboxes to leave messages, but may be allowed to arm and disarm
and access other functions according to their programmed authorization
level.
When you add a new user, Comfort finds the next available user number
(1 to 16), e.g.
New User... 2, Enter New code and # key
Enter a 4 to 6 digit code and #. Comfort asks for confirmation.
Enter the number again. If the number does not match the 1st number
entered, Comfort says "wrong code" and repeats
To confirm , enter new code and # key
Comfort takes the last code entered as the new code, and checks that
the next code entered matches this. Comfort checks for a match between
2 successive codes before accepting the new code. Comfort then says
Sign-in code OK
Repeat this for the other users to be added, up to a total of 16.
Each user should change his/her sign-in code in his own menu. Each
user can record a mailbox name in User Menu (2,6,2). Recording a User
name will cause the name to be included in the list if names for an
incoming caller to leave messages ,e.g. "Press 1 for Bill, 2 for Hillary,..."
If a user has no mailbox name, the caller can still leave a message in the
Comfort II User Manual
85