Time Format
Select between various time formats
LCD Contrast
Select LCD Contrast 0 to 63
BackLight Off
Select the brightness of the backlight when it is in the
off state (after timeout). Values 0 to 31 . Higher value
allows the LCD to be read even when backlight is off.
Save Menu
Save and Apply - Yes, No (default NO)
“Yes” causes settings to be saved and KP04A to reset
“No” causes changes to be lost and exit from Settings
menu
Press F again to confirm the selection (Yes/No).
The settings menu will exit without changes after 25
seconds without any key pressed.
To discard any changes you must press F in
settings to go to Save Menu and select NO.
KP04A Settings in Comfigurator
The KP04A settings can also be changed in
Comfigurator, and can also be read from the KP04A to
Comfigurator. In Comfigurator, go to the Modules Tab,
right Click and select Scan for all Modules.
