Step
Action
3
Slot the tabs of the front and rear trolley spacer blocks into the
corresponding slots in the top of each wheel trolley unit to assemble each
wheel trolley, as shown in the images below.
Front trolley
Rear trolley
4
Move one rear wheel trolley into position at one side of the column stand, and
then place the jack under the column stand close to the wheel trolley
(position X in the illustration indicates a suitable jack position).
Use the jack to raise the column stand until there is sufficient clearance to
move the rear wheel trolley under the column stand. Make sure that the
raised mounting socket on top of the wheel trolley is aligned with the
corresponding recess (safety pin mounting position) in the column stand.
X
32
AxiChrom wheel kit Instructions 29145462 AB
