Step
Action
8
Place the jack under the front crossbeam (A) of the column stand, about 300
mm to one side of the recessed safety pin mounting position in the center of
the crossbeam, so that there will be space to fit the front wheel trolley unit (B)
under the center of the column stand.
A
B
9
Use the jack to lift the front of the column until the front trolley and spacer
unit can be placed under the front beam of the column stand. Make sure that
the mounting socket on the wheel trolley is aligned with the recess position
in the crossbeam.
10
Lower the column onto the front trolley and remove the jack.
34
AxiChrom wheel kit Instructions 29145462 AB
