10.1 Inspection
Periodically – based on usage – you should make these inspections:
•
Inspect the tie rods and nuts for excessive wear and replace as needed.
•
Inspect the mating surfaces of the flow manifold and backing plate for scratches.
•
Inspect the sanitary connection gaskets for damage or wear and replace the gaskets as needed.
•
Check the rigidity of the stand. If the stand wobbles, tighten the screws that hold the legs and
cross braces together.
If the mating surfaces of the flow manifold and backing plate become excessively scratched, contact
your Cytivarepresentative for assistance.
10 Maintenance
10.1 Inspection
56
Learning to Use the Kvick Lab Cassette Holder User Manual 18117269 AI
